1. Install a safety device like ground fault circuit interrupter (GFCI)
One of our most important tips to keep your warehouse safe, “ electrical wise ”, is by installing GFCI outlets. They can prevent electrical shocks by automatically shutting off power to the circuit if it detects current leakage.
With this, they can lower the risk of fatal shocks and fire due to faulty wiring. Therefore, make sure you have these outlets installed in your warehouse to keep it safe.
2. Secure the connection of the ground wire around your breaker box
If you’re still using the old-school electrical boxes, then you should know that the ground wire is the most important safety precaution in it. It’s there to protect your place from electrical charge surges. If it isn’t securely fastened around the breaker box, any charge that comes into contact with metal can cause a dangerous short circuit, which could lead to fire or even death!
Ground wires can work their way loose or even break off completely. To prevent this from happening, secure them with an approved connector instead of just wrapping around the breaker box’s base with tape or wire.
So, when installing new equipment in your warehouse, be sure to check for any exposed wires before plugging anything in and start up your equipment. It might not seem like much but one single spark can destroy everything you’ve worked so hard for!
3. Inspect all electrical wiring and switches for signs of wear or damage
Have you been noticing more electrical problems with your warehouse? Electrical wiring and switches can wear out over time. While this might not seem like a big deal, it can be quite dangerous if these wires are damaged or worn out.
At a certain point, it’s best to replace the old wiring or switch rather than continue using them. Damaged wiring could lead to an electric shock, while worn-out switches could cause fires. That’s why it’s important to inspect the electrical wiring and switches for potential problems.
A lot goes into making sure that everything is in perfect working order, so when you find any signs of wear or damage, don’t hesitate to call an electrician like DCI Electrical to come out and inspect it for you before something happens and puts lives at risk.
4. Test your fire alarm monthly and replace batteries as needed
Warehouse owners need to test their fire alarm monthly and replace the batteries as needed. A fire can happen at any time, so you must always be prepared. It doesn’t take much time to do these two things, but they could save your business in an emergency.
Don’t let your warehouse management and safety strategy be a victim of negligence. See to it that your fire alarms are always up to date.
5. Replace any faulty circuit breakers, fuses, or power cables
Electricity is the lifeblood of a warehouse. Without it, you’re unable to stock and ship goods. It’s one of the most overlooked aspects in business that can quickly ruin your company if not looked at regularly. You could be liable for thousands of dollars worth of damages if it does happen.
Concerning this, the last thing you want to do is put off replacing faulty circuit breakers, fuses, or power cables because when they go out completely; it can be catastrophic for your inventory and profits. Have someone check the power cables, circuit breakers, and fuses regularly to make sure they’re all working properly.
If you have not checked the wiring in your building for a while, this is the time to do it! The safety of all in your building depends on having working electricity in case of an emergency.
6. Install safety lights outside and inside your warehouse to keep it well lit
It’s important to keep your warehouse well lit for safety reasons. Many things can go wrong in a dark or poorly lit warehouse, such as workers tripping and falling on something dangerous like an abandoned box cutter blade.
Lighting up your workspace makes it easier to see what needs doing next, whether that be sorting through boxes or just getting around safely at night after hours. It also helps security cameras capture footage more clearly which will help identify perpetrators if any crimes do happen on site.
7. Clean up any spills to avoid corrosion and can cause power outages
It’s a good idea to clean up any spills as soon as they happen, especially if it’s on metal surfaces. Spills can lead to corrosion that causes power outages in warehouses. Cleaning up the spill will reduce the risk of a power outage and save you money down the road.
One way to avoid this altogether is by storing non-conductive materials away from electrical sources. You can also place them in separate areas with little foot traffic. Doing so will help you and your staff avoid bigger electrical problems.
Cleaning up any spills will also help eliminate harmful fumes caused by rusting metals soaked in oil, which can lead to breathing problems.
8. Make sure all of your emergency exits are clear at all times
I know you’re probably thinking that this is a no-brainer, but it’s not. You need to make sure that all of your emergency exits are clear at all times in your warehouse. This includes the front door, back door, side doors, windows and any other possible escape routes.
It can be difficult to ensure that all of your emergency exits are clear at all times in a warehouse. So, to help you out, here are some things to consider when looking for potential safety hazards and how to fix them:
- Consider the location of your emergency escape routes (doors and windows). Make sure they’re easy enough to get to during an emergency. They should never be blocked or obstructed by items such as boxes, machinery, or other obstacles.
- Make sure any fire extinguishers near hazardous materials like gas leaks are easily accessible and up-to-date with new cartridges. It’s also important that employees know where they are located in case of emergencies.
- Keep exit doors unlocked so people can quickly flee.
If boxes or other items are blocking these exits then you should remove them immediately. By doing so, you’ll be able to get out of the building quickly if there’s an emergency.
Your warehouse is your business and you want to make sure everything is in working order. Have a licensed electrician come in and check the electrical system every year. They’ll be able to identify any problems that could potentially affect the safety of your staff and assets. This way, you can take care of them before it becomes an issue.
It’s important to have them not just look at where electricity comes in, but also consider how it gets distributed throughout the building. The last thing you need is for an emergency shutdown of power which could mean big losses for your business!
Our electricians at DCI Electrical are licensed and reliable at warehouse maintenance in Toowoomba. We offer great rates on services such as installation, repair and more with fast turnaround times!
Don’t wait until there’s a problem, call us today!
If you’re thinking about installing solar panels on your home, here are some things you need to know.
There are a number of safety checks you can carry out on a regular basis to ensure that everything is in working order. How often should you carry out these checks? And what do they involve?
If you’re not sure whether your smoke alarms are compliant or not, then now is the time to check. Read on to learn more.
Light bulbs are the most common household item in every home. They make up for about one-third of your energy bill. But are you aware that there are different types you can choose from?
Summer is the time to enjoy all things outdoors; however, its scorching temperatures can mean higher energy bills. But don’t fret, there are ways you can enjoy this season and save on your bills at the same time.
Test and tag is the process that checks the safety of electrical equipment, tools, and even portable appliances at workplaces. This also ensures compliance with the following legislation. Electrical Safety Regulation 2013 AS/NZ 3012 Electrical Installation -...
Electrical switchboards are the heart of the electrical operation of any home. However, they can become outdated especially with the growing electrical requirements of various families at home. Therefore, it’s important to know if it is already time for a switchboard...
Do you know that your lights have a significant effect on the aesthetics and ambience of your house? So, whether you’re renovating your home or planning a new build, here are our 7 tips that will help you on how to plan the right lighting for your home. ...
Spring cleaning has been a tradition if not a habit for most households in Queensland. So if you are also planning to do a spring clean soon, you might want to include these 5 electrical maintenance you can do by yourself. Test Your Smoke Detector Smoke...
Being a homeowner can be both exciting and frustrating at the same time. It is exciting because a house is one of the most expensive investments one can have; but it can also be frustrating because of the many things you have to attend to. Among those things that you...